42 Puoi prenotare le disponibilità ora
Quantità | |
---|---|
1+ | € 13,950 |
10+ | € 12,200 |
20+ | € 11,580 |
Informazioni sui prodotti
Panoramica del prodotto
The 760308111 is a wireless power charging Transmitter Coil with pot core results in limiting the stray field in the design. This WE-WPCC coil features high permeability shielding coil, with a large number of mating cycles to avoid connector damages and cancels charging flux to be not coupled into sensitive components or batteries. It is applicable for up to 20W (up to 200W outside the standards) and supports 20MHz typical self-resonant frequency. This coil can be applicable in explosion sensitive area where the use of a physical connection is hazardous. It is recommended that the temperature of the transmitter coil does not exceed 105°C under worst case operating conditions.
- 3.5k/s Typical ramp-down rate
- Qi Standard compliant
- Litz wire used
- Highest Q-value available on market
- High reliable construction
Avvertenze
Gli agenti detergenti usati per pulire le applicazioni potrebbero danneggiare o alterare le caratteristiche del componente, corpo, pin o terminazione.
Specifiche tecniche
WE-WPCC Series
± 10%
1 bobina
16A
80 a 125kHz
53.3mm
6mm
-20°C
No SVHC (21-Jan-2025)
6.3µH
0.024ohm
2 strati
20MHz
-
53.3mm
montaggio su scheda
105°C
Documenti tecnici (2)
Prodotti associati
4 prodotti trovati
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:China
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
RoHS
RoHS
Certificato di conformità del prodotto