Ti serve altro?
Quantità | |
---|---|
1+ | € 36,730 |
5+ | € 35,990 |
10+ | € 35,250 |
25+ | € 34,550 |
Informazioni sui prodotti
Panoramica del prodotto
The VFC320BP is a monolithic Voltage-to-Frequency and Frequency-to-Voltage Converter provides a simple low cost method of converting analog signals into digital pulses. The digital output is an open collector and the digital pulse train repetition rate is proportional to the amplitude of the analog input voltage. Output pulses are compatible with TTL and CMOS logic families. High linearity (0.005%, maximum at 10kHz FS) is achieved with relatively few external components. Two external resistors and two external capacitors are required to operate. Full scale frequency and input voltage are determined by a resistor in series with-In and two capacitors (one-shot timing and input amplifier integration). The other resistor is a non-critical open collector pull-up (fOUT to +VCC). The VFC320 is available in two performance grades. The VFC320 is specified for the -25 to +85°C range.
- V/F or F/V conversion
- 6-decade Dynamic range
- 20ppm/°C Maximum gain drift
- Output TTL/CMOS compatible
Specifiche tecniche
1MHz
0.1%
DIP
-
No SVHC (27-Jun-2018)
da 0Hz a 1MHz
da ±13V a ±20V
14Pin
-
Documenti tecnici (1)
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:Malaysia
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
RoHS
RoHS
Certificato di conformità del prodotto