USBDF01W5
Filtro anti EMI, 2 canali, terminatore downstream USB, protezione ESD, SOT-323-5
Ti serve altro?
| Quantità | |
|---|---|
| 5+ | € 0,311 |
| 10+ | € 0,219 |
| 100+ | € 0,190 |
| 500+ | € 0,180 |
| 1000+ | € 0,168 |
Informazioni sui prodotti
Panoramica del prodotto
The USBDF01W5 is an EMI Filter and Line Termination for USB downstream ports. The USB specification requires USB downstream ports to be terminated with pull-down resistors from the D+ and D- lines to ground. On the implementation of USB systems, the radiated and conducted EMI should be kept within the required levels as stated by the FCC regulations. In addition to the requirements of termination and EMC compatibility, the computing devices are required to be tested for ESD susceptibility. The USBDFxxW5 provides the recommended line termination while implementing a low pass filter to limit EMI levels and providing ESD protection which exceeds IEC 61000-4-2 level 4 standard.
- Monolithic device with recommended line termination for USB downstream ports
- Integrated Rt series termination and Ct bypassing capacitors
- EMI / RFI noise suppression
- Required line termination for USB downstream ports
- IPAD™ technology provides high flexibility in the design of high density boards
- Tailored to meet USB 1.1 standard
Specifiche tecniche
Downstream USB e Filtro EMI Terminatore con ESD
Filtro C-R-C Pi
5Pin
No SVHC (21-Jan-2025)
2 Linee Dati
SOT323
-
Documenti tecnici (2)
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:Malaysia
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
RoHS
RoHS
Certificato di conformità del prodotto