Ti serve altro?
Quantità | |
---|---|
1+ | € 3,580 |
10+ | € 2,730 |
25+ | € 2,510 |
50+ | € 2,400 |
100+ | € 2,280 |
250+ | € 2,230 |
500+ | € 2,200 |
Informazioni sui prodotti
Panoramica del prodotto
STM32WL33C8V6 is a multiprotocol LPWAN arm-based 32bit microcontroller. It is a high performance ultra-low power wireless application processor, intended for RF wireless applications in the sub-1GHz band. It embeds a wide set of peripherals, including a 20-pin (16 segments + 4 commons) LCD driver, 12bit, 8 channel ADC, analogue comparator, DAC, LC sensor controller, RTC, IWDG, general purpose timers, AES-128, RNG, CRC, communication interfaces such as USART, SPI, and I2C. Moreover, the security features enable secure boot with USART/SWD block (write protection) and sensitive information storage in flash (read-out protection). The integrated highly efficient SMPS step-down converter together with the state transition speed between low-power and active states minimize in every condition the average current consumption enabling the STM32WL33xx to be the wireless application processor most suited for battery-operated applications.
- Includes ST state-of-the-art patented technology
- Low power autonomous wakeup receiver (LPAWUR), featuring: OOK data receiver channel
- Sensitivity: -54dBm, current consumption: 4µA in always-on autonomous mode
- Secure bootloader with SWD disabling, AES-128 co-processor and 16-bit TRNG
- Embedded UART bootloader with selectable write and read-out protection
- Ultra-low-power power-on-reset (POR) and power-down-reset (PDR)
- Programmable voltage detector (PVD)
- Supply voltage range from 1.7 to 3.6V, 64kbyte flash/16kbyte RAM
- 48-pin VFQFPN package
- Temperature range from -40°C to +85°C
Specifiche tecniche
STM32 Family STM32WL33xx Series Microcontrollers
32 bit
64KB
VFQFPN-EP
I2C, I2S, SPI, LPUART, USART
8Canali
1.7V
-40°C
montaggio superficiale
STM32WL
No SVHC (21-Jan-2025)
ARM Cortex-M0+
64MHz
48Pin
32I/O's
16KB
12 bit
3.6V
85°C
STM32
-
Documenti tecnici (2)
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:Philippines
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
Certificato di conformità del prodotto