MPQ6527GF-AEC1-P

MPQ6527 is a ten-channel, half-bridge DMOS output driver with serial input control and integrated power MOSFETs. The device has a 5.5V to 40V input voltage range, with a maximum 0.8A of output current capability. The device’s ten half-bridges can be controlled separately from a standard serial data interface and each channel has various diagnostic functions. The MPQ6527 has very low quiescent current in standby mode. Full protection includes short-circuit protection (SCP), undervoltage protection (UVP) and thermal shutdown. Various diagnostic functions shorted output, open load and overtemperature, overvoltage and undervoltage conditions. The MPQ6527 requires a minimal number of readily available, standard external components, and is available in a TSSOP-28 EP package. Typical applications include driving various loads in automotive and industrial applications and DC motors.

• High-side and low-side drivers connected in half-bridge configurations
• RDS(ON) (HS-FET and LS-FET), typically 1.3ohm
• Very low quiescent current in standby mode vs. total temperature range
• Overtemperature protection (OTP) and pre-warning
• Undervoltage (UV) and overvoltage lockout (OVLO)
• Serial data interface
• Serial interface clock frequency up to 5MHz
• Compliance with 3.3V and 5V systems
• AEC-Q100 Grade 1 qualified

Note

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.