200 Puoi prenotare le disponibilità ora
Quantità | |
---|---|
1+ | € 3,350 |
10+ | € 2,540 |
50+ | € 2,190 |
100+ | € 2,090 |
250+ | € 2,000 |
500+ | € 1,970 |
Informazioni sui prodotti
Panoramica del prodotto
The MAX4472ESD+ is a quad, rail to rail op-amp in 14 pin NSOIC package. This micropower op-amp operates from a single +1.8V to +5.5V supply and draws only 750nA of supply current. The ultra low supply current, low operating voltage and rail to rail output capabilities make this operational amplifier ideal for use in single lithium ion (Li+) or two-cell NiCd or alkaline battery systems. The amplifier is capable of driving the output voltage to within 4mV of the rail with a 100Kohm load and can sink and source 11mA with a +5V supply. Typical applications include micropower thermostats, electrometer amplifiers, solar powered systems, remote sensor active, badges and pH meters.
- No phase reversal for overdriven inputs
- Operating temperature range from -40°C to 85°C
- High open-loop voltage gain is 120dB
- Low input offset voltage is 500μV
- Gain bandwidth product is 9KHz
- 250pF (min) capacitive load capability
- Common mode rejection ratio is 95dB and power supply rejection ratio is 90dB
- Unity gain stable
Note
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Specifiche tecniche
4Canali
2V/µs
NSOIC
CMOS
500µV
montaggio superficiale
85°C
-
No SVHC (21-Jan-2025)
-
4 amplificatori
9kHz
da 1,8V a 5,5V
14Pin
uscita rail-to-rail (RRO)
200pA
-40°C
-
MSL 1 - Non Limitata
NSOIC
9kHz
2V/µs
Documenti tecnici (1)
Prodotti associati
3 prodotti trovati
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:Thailand
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
RoHS
RoHS
Certificato di conformità del prodotto