Ti serve altro?
Quantità | |
---|---|
1+ | € 23,100 |
5+ | € 22,050 |
10+ | € 21,000 |
50+ | € 20,480 |
100+ | € 19,950 |
Informazioni sui prodotti
Panoramica del prodotto
The VDRIVE3-LD is an USB host/microcontroller application Development Module with an enclosure, offers a lid to cover the USB port to provide protection in harsh environments. The default firmware of the VDRIVE3 supports UART/SPI communications with the embedded USB host controller and USB host port. This product provides an attractive solution for quick and easy integration of applications with a USB flash disk or other USB client devices. VDRIVE3 is designed to support quick and easy integration of a UART/SPI application with a USB client device. The VDRIVE3 comes in a neat enclosure displaying a bicolour LED, making it suitable for incorporating into finished product designs. The VDRIVE3 utilises FTDI's Vinculum-II (VNC2-48L1B) dual USB host controller IC.
- USB A-type socket to connect to USB client devices
- 2mm (0.08") pitch 8-pin header used for the UART/SPI interface
- Connects directly and communicates with a FTDI TTL-232R-3V3-2mm USB-UART cable
- Jumper selectable UART and SPI interfaces, both operating at 3.3V TTL/CMOS
- Pre-programmed with V2DAP firmware
- Vinculum-II debugger module port under neat enclosure, for changing the firmware
- UART programming mode control signals PROG# and RESET# are accessible via an internal header
Specifiche tecniche
-
VNC2-48L1B
-V
-
-
USB
5.5V
No SVHC (21-Jan-2025)
Documenti tecnici (1)
Prodotti associati
1 prodotto trovato
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:China
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
RoHS
RoHS
Certificato di conformità del prodotto