MAX4494ASA+

The MAX4494ASA+ is a low power, general-purpose, rail to rail dual operational amplifier (op-amp) in 8 pin NSOIC package. This op-amp designed for use in systems powered with dual supplies from ±2.25V to ±5.5V or with a single supply of +4.5V to +11V. It provides a unity gain bandwidth of 5MHz with only 770µA of quiescent current per amplifier. The wide input common-mode range extends from 200mV beyond the negative rail to within 1.5V of the positive supply rail while the output swings within 10mV (RL = 100Kohm) of either rail. It is ideally used at battery-powered systems, DAC output amplifiers, industrial control systems, voltage reference generators and signal conditioning.

• Rail to rail output swing
• Operating temperature range from -40°C to +125°C
• Input voltage range extends 200mV below the negative rail
• 110dB open-loop gain (RL = 100Kohm)
• Low THD+N of 0.002% (f = 1KHz)
• No phase reversal for overdriven inputs
• Unity gain stable

Note

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party