MAX407ESA+T

The MAX407ESA+T is a dual 1.2µA max, operational amplifier (op-amp) in 8 pin NSOIC package. It features a supply current of less than 1.2µA per amplifier that is relatively constant over the entire supply range which represents a 15 to 20 times improvement over industry-standard micropower op amps. A unique output stage enables this op amp to operate at ultra-low supply current while maintaining linearity under loaded conditions. In addition, the output is capable of sourcing 1.8mA when powered by a 9V battery. The common-mode input-voltage range extends from the negative rail to within 1.1V of the positive supply (for the singes, 1.2V for the duals and quads) and the output stage swings rail to rail. The entire family is designed to maintain good DC characteristics over the operating temperature range, minimizing the input referred errors. It is specially designed for battery operated systems.

• Single supply range from +2.5V to +10V
• Internally compensated to be unity gain stable, gain bandwidth is 8KHz
• Output swings rail to rail
• Offset voltage is 3mV
• Input voltage range includes negative rail
• Input bias current is 1pA
• CMRR is 80dB, PSRR is 200µV/V
• Operating temperature range from 0°C to +70°C
• Battery-Powered Systems; Cordless Phones; Electrometer Amplifiers; Glucose Meters; GPS Solutions; Intrinsically Safe Systems;
• IP Camera; Medical Instruments; Panel Meters; pH Meters; Photodiode Pre-Amps; Power Meters; Programmable Logic Controllers (PLCs)

Note

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party