MAX16127TC+T

The MAX16127TC+T is a load dump/reverse voltage protection circuit in 12 pin TQFN package. The load-dump/reverse voltage protection circuits protect power supplies from damaging input voltage conditions including overvoltage, reverse voltage and high voltage transient pulses. Using a built-in charge pump, the device controls two external back to back N-channel MOSFETs that turn off and isolate downstreams power supplies during damaging input conditions such as an automotive load dump pulse or a reverse battery condition. Operates down to 3V to ensure proper operation during automotive cold-crank conditions. The device feature a flag output that asserts during fault conditions. For reverse voltage protection, external back to back MOSFETs outperform the traditional reverse battery diode, minimizing the voltage drop and power dissipation during normal operation. The MAX16127 provides limiter mode fault management for overvoltage and thermal shutdown conditions.

• Supply voltage range is 3V to 30V
• Automotive temperature range from -40°C to 125°C
• External resistors to adjust overvoltage and undervoltage comparator thresholds
• Switch mode fault management for overvoltage and thermal shutdown conditions
• Wide input voltage protection range from -36V to +90V
• Supply current of 350μA (max) and shutdown current of 100μA (max) at 30V input
• Increases protection of sensitive electronic components in harsh environments
• Reduced power dissipation compared to discrete solutions
• Start-up response time of 150µs and autoretry timeout of 150ms
• OVSET/UVSET threshold (rising) voltage of 1.225V

Avvertenze

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Note

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party