Ti serve altro?
Quantità | |
---|---|
1+ | € 1,300 |
10+ | € 0,857 |
100+ | € 0,591 |
500+ | € 0,512 |
1000+ | € 0,403 |
2500+ | € 0,375 |
5000+ | € 0,346 |
Informazioni sui prodotti
Panoramica del prodotto
The TS3USB30ERSWR is a high-bandwidth 1:2 Analog Switch specially designed for the switching of high-speed USB 2.0 signals in handset with limited USB I/Os. The wide bandwidth (900MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from an USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation and is compatible with various standards, such as high-speed USB 2.0 (480Mbps). The TS3USB30E integrates ESD protection cells on all pins.
- IOFF Supports partial power-down-mode operation
- Low power consumption
- Latch-up performance exceeds 100 mA per JESD 78, class II
- ESD performance I/O port to GND
- Green product and no Sb/Br
Avvertenze
Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Specifiche tecniche
multiplexer/demultiplexer analogico
da 3V a 4,3V
QFN
2Canali
10ohm
1:2
montaggio superficiale
85°C
-
No SVHC (27-Jun-2018)
alimentazione singola
10ohm
10Pin
6ohm
-
USB
-40°C
-
MSL 1 - Non Limitata
Legislazione e ambiente
Paese in cui si è svolta l'ultima parte più significativa del processo produttivoPaese d'origine:China
Paese in cui si è svolta l'ultima parte più significativa del processo produttivo
RoHS
RoHS
Certificato di conformità del prodotto