MAX4508CSE+T

The MAX4508CSE+T is a fault protected, high voltage, single 8 to 1 multiplexer with output clamps in 16 pin NSOIC package. It operates with dual supplies of ±4.5V to ±20V or a single supply of +9V to +36V. This multiplexer features fault-protected inputs, rail to rail signal handling capability and overvoltage clamping at 150mV beyond the rails. It offers ±40V overvoltage protection with supplies off and ±25V protection with supplies on. On-resistance is 400 ohm max and matched between channels to 15ohm max. All digital inputs have TTL logic thresholds ensuring both TTL and CMOS logic compatibility when using a single +12V supply or dual ±15V supplies. It is pin compatible with industry standard DG508 device. Typical applications include data acquisition systems, signal routing and redundant/backup systems.

• Normally open switches
• Operating temperature range from 0°C to 70°C
• No power supply sequencing required and all channels off with power off
• Maximum on-resistance of 950 ohm at TA = +25°C with single +12V supply
• No off leakage current of 0.01nA at 25°C with single +12V supply
• 1Kohm output clamp resistance during overvoltage
• Fault response time of 20ns & channel to channel crosstalk of -62dB at 25°C with single +12V supply
• Charge injection of 2pC and off-isolation of -70dB at 25°C with single +12V supply
• Output clamped to appropriate supply voltage during fault condition
• 35ohm maximum on-resistance match between channels with single +12V supply

Note

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party