AD7173-8BCPZ-RL

AD7173-8BCPZ-RL is a low-power, 31.25kSPS, 24-bit, highly integrated sigma-delta ADC. Eight flexible setups with reconfigurability for output data rate, digital filter mode, offset/gain error correction, reference selection, buffer enables, and more. This per-channel reconfigurability extends to the output data rate used for each channel when using sinc5 + sinc1 filter. The sinc5 + sinc1 filter maximizes channel scan rate, and the sinc3 filter maximizes resolution and enhances 50Hz/60Hz rejection, with four selectable options to maximize rejection. Integrated diagnostic features, including CRC, register checksum, temperature sensor, cross point multiplexer, burnout currents, and GPIOs/GPOs. It is used in applications such as process control: PLC/DCS modules, voltage, current, temperature, and pressure measurement, flow meters, medical and scientific multichannel instrumentation, seismic instrumentation, chemical analysis instrumentation: and chromatography.

• Low power, 8-/16-channel, highly integrated multiplexed analogue-to-digital converter (ADC)
• Precision analogue input buffers and reference input buffers
• Cross point multiplexer (enable system diagnostic), 8 full differential or 16 single-ended channels
• Clock oscillator, GPIO and GPO pins with automatic external mux control
• 3-/4-wire serial digital interface (Schmitt trigger on SCLK), CRC error checking
• Integral nonlinearity is ±3ppm/FSR typical at (AVDD1 = 3V to 5.5V, AVDD2 = 2V to 5.5V)
• Fast and flexible output rate from 1.25SPS to 31.25kSPS, SPI, QSPI, MICROWIRE, and DSP compatible
• Noise free resolution is 24-bits typical at (1.25SPS, REF+ = 5V)
• Normal mode rejection is 90dB typical at (external clock, 20SPS ODR (post filter))
• Operating temperature range from -40°C to +105°C, 40-lead LFCSP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party