Low

ATMEGA324PV-10PU - 

Microcontrollore 8 Bit, Bassa Potenza Prestazioni Elevate, ATmega, 10 MHz, 32 KB, 2 KB, 40 Pin, DIP

L'immagine ha puramente scopi illustrativi. Vedere la descrizione del prodotto.

Cod. produttore:
ATMEGA324PV-10PU
Codice Prodotto
1455112
Gamma di prodotti
ATMega Microcontrollers
Datasheet tecnico:
(EN)
Visualizza tutti i documenti tecnici

Informazioni sui prodotti

:
DIP
:
10MHz
:
32KB
:
40Pin
:
2KB
:
ATmega
:
I2C, SPI, UART
:
32I/O
:
1.8V
:
5.5V
:
Pezzo
:
ATMega Microcontrollers
:
-
Trova prodotti simili Per trovare prodotti simili, scegli e modifica gli attributi indicati sopra.

Panoramica del prodotto

The ATMEGA324PV-10PU is a high-performance picoPower 8-bit AVR RISC-based Microcontroller combines 32kB ISP flash memory with read-while-write capabilities, 1kB EEPROM, 2kB SRAM, 32 general purpose I/O lines, 32 general purpose working registers, real time counter, three flexible timers/counters with compare modes and PWM, 2 USARTs, byte oriented 2-wire serial interface, 8-channel/10-bit A/D converter with optional differential input stage with programmable gain, programmable watchdog timer with internal oscillator, SPI serial port, JTAG (IEEE 1149.1 compliant) interface for on-chip debugging and programming and six software selectable power saving modes. The device operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processor speed. The device is manufactured using Atmel's high density nonvolatile memory technology.
  • Advanced RISC architecture
  • Power-on reset and programmable brown-out detection
  • Internal calibrated RC oscillator
  • External and internal interrupt sources
  • Six sleep modes - idle, ADC noise reduction, power-save, power-down, standby and extended standby
  • 131 Powerful instructions-most single clock cycle execution
  • 32 x 8 General purpose working registers
  • Fully static operation
  • Up to 20MIPS throughput at 20MHz
  • On-chip 2-cycle multiplier
  • JTAG (IEEE std. 1149.1 compliant) interface
  • Programmable watchdog timer with separate on-chip oscillator
  • On-chip analog comparator
  • Interrupt and wake-up on pin change
  • Byte-oriented two-wire serial interface
  • Two programmable serial USART
  • Master/Slave SPI serial interface
  • Real-time counter with separate oscillator
  • Six PWM channels

Applicazioni

Industriale